电热地板采暖系统，EV-S 单芯发热电缆

EV-S 单芯发热电缆

1┄发热体：7股铜镍合金胶合，大于8欧姆需螺旋导体
Heating conductor:7 wires stranded,helix conductor required if aboce 8 Ohm
2┄绝缘体：硅橡胶绝缘（lE2）符合VDE0253标准，壁厚为0.8mm
lnsulation:Silicone rubber insulation IE2 Pursuant to VDE60245,
wall thickness 0.8mm
3┄内护套层：聚氯乙烯ST6，符合IEC60800标准，壁厚为0.8mm
lnner Covering:PVC/ST6 pusrsuant to IEC60800,wall thickness ca.0.8mm
4┄接地屏蔽层：平行铺制成镀锡铜绞线32×0.20mm(1.00mm²)及铝箔复合薄膜
Screening: S-Z-lay made of tinned copper wires(1.00mm²)
aluminum tape undemeath
5┄外护套层：聚氯乙烯ST6，符合IEC60800，壁厚度0.8mm
Outer sheath: PVC/ST6 pusuant to lEC60800 wall thickness ca.0.8mm

技术参数Technical Data

√工作电压Voltage: 220V/230V
√输出功率Power(mat): 20w/m
√最高表面温度Nominal temp. limit: 90
√绝缘层Insulation: 硅橡胶Silicone rubber 2G
√测试电压Test voltage: 5kV
√单位面积功率Power per unit area: 80-200w/m²
√直径Size: φ6.9mm
√最低安装温度Min. installation temperature: +5
√保护电流Protection current: 30mA